In our last few posts, we've been looking at best practices on maintaining building equipment. Our posts Be Strategic with Building Scheduled Maintenance and How To Test The Quality Of Your Preventative Maintenance look at how to get the most out of equipment maintenance. In this post, we will look at how you can use data to evaluate whether to replace or repair equipment, even while a technician is on site.
There is a balancing act involved when you evaluate your equipment. Primarily you are weighing the cost of a new purchase against preventative maintenance (PMs) and/or repairs, book value (if any),energy savings, and expected life of the equipment. We recommend using a worksheet, much like our HVAC Replacement Strategy worksheet, to help determine whether to replace or repair a piece of equipment. You can quickly make such determinations with the right data and tools to calculate.
Below are some of the basic points from our HVAC worksheet, although the methodology can be used when weighing repair vs. replace on any piece of equipment.
The goal is to develop a ranking system, from best to worst, that you can judge all your units by. In this way, you can prioritize the lowest ranking units (which really need fixing) and see opportunities to proactively bulk buy equipment or parts.
Along with the above ranking strategy, you should have vendors survey equipment each year and take strategic photos of units. Where your equipment ranks, along with the photographic evidence, correlates to a life expectancy of the unit.
Recommended strategic shots of equipment include pictures of the:
With data like this at your fingertips, you can be proactive with replacements. For example, if you notice that there are a high number of units that fall in the replacement category, you can pre-buy (with potential bulk buying savings) and strategically store those units around the country. This can save significantly on the downtime involved when reactively purchasing replacements and getting them to a required location. It is not uncommon for replacement units to take up to 3 weeks from order to install.
Downtime can lead to:
When you pre-buy units, you can proactively schedule installs. If you can plan for February installs, for example, you can usually secure much lower labor rates because you are keeping technicians busy during regular downtimes. In fact, negotiating these sorts of installs along with bulk buying can give you quite a bit of leverage with vendors. You will be able to do more with the budget you have by being proactive.
There can be a number of capital spend versus expense criteria involved on equipment. That is why ranking units helps as it gives you a clear picture of the lifelong value on a unit. And rankings help you communicate monetary value to those authorizing budgets.
The value left on units is important to take into account as well. Let's say you have a four-year-old HVAC unit that you wish to replace. You need to account for the cost of the new equipment plus the value still on the books.
If the four-year-old unit replacement is going to cost $30,000, but there is $10,000 still on the books all up, you are going to take a hit of $40,000.
Now let's say you decide to replace parts instead of replacing the four-year-old HVAC unit. But your technician determines that you are replacing parts that are going to just break again due to the age of the unit and the fact that it cannot run as efficiently as it should. If you can calculate repeat costs and the drain on utilities an inefficient unit will cause, you can overview the true ROI and make better determinations on repair vs. replacement.
If you have the data to do these calculations, you will be able to prove what the right cost-savings decisions are to budget authorizers. When your PMs are streamlined, proactive purchasing and installing costs are at play, and you weigh all the value points, you can show how cost reductions will occur despite higher preventative and proactive spending.
Be sure to download our HVAC replacement worksheet below for a really good example of the types of replacement criteria, ROI calculations, and HVAC unit information to consider when deciding on replacement vs. repairing.
Why Setpoint is not The Zone Temp
Don't Wait For Building Upgrades To Save Money On Energy
How To Test The Quality Of Your Preventative Maintenance
4 Common Myths of Energy Conservation in Building Management