As summer temperatures break new records and seasons grow longer, facility managers across multi-site retail portfolios are facing unprecedented challenges. Not only are cooling systems working harder under soaring demand, but deferred maintenance and silos in data collection can amplify both operational costs and occupant discomfort. Here in July 2025, National Oceanic and Atmospheric Administration’s (NOAA) Climate Prediction Center projects above-average heat across much of the U.S. this summer. Climate Central reports that 88% of major U.S. cities now experience an average of six “extremely hot” summer days each year, up from virtually none just a few decades ago. In 74 of those cities, that number climbs even higher, with seven or more added days of extreme heat annually. Even more striking: nearly two-thirds are enduring at least two additional weeks (14+ days) of hotter-than-normal summer conditions each year, putting consistent strain on HVAC systems and facility budgets.
This extended season of heat stress has made HVAC systems the most mission-critical assets in the building, and also the most vulnerable. Without proactive strategies in place, retail sites risk higher utility bills, equipment failure during peak demand, and lost revenue from uncomfortable customer environments. Traditional run-to-fail or time-based maintenance models simply can’t keep up. Facility leaders need a smarter, more agile approach to managing asset health, especially as equipment operates beyond traditional design cycles in these new climate realities. Now, let’s dig into why condition-based HVAC health checks are indispensable and how trending asset data can arm facilities teams for peak performance and profitability.
Hotter, Longer Summers Mean Higher HVAC Strain
Key climate metrics show a clear and dramatic shift. An analysis of 247 U.S. weather stations reveals that 234 cities now experience an average of six “extremely hot” days each summer, compared to virtually none just a few decades ago. Summer itself is also getting longer. In urban areas, the season now lasts an average of 30 days more than it did in the past. As heating seasons extend and cooling periods grow longer, HVAC systems are being pushed beyond their intended design cycles. This leads to higher energy consumption, accelerated wear on components, and a greater risk of failure when systems are needed most.
Utility data indicates that while warmer winters mildly reduce heating loads, it’s runaway summer cooling loads that inflate electricity bills by 10–22%. And with power peaks triggered by extreme heat, blackouts or brownouts become nontrivial risks. This is especially pressing for retail portfolios where tenant experience and revenue are tied closely to comfort.
Deferred Maintenance is a Recipe for Failure
Postponing routine HVAC inspections and replacements may seem low-cost in the short term, but it compounds risk. Dirty coils, clogged filters, or misaligned belts increase energy wastage, reduce system capacity, and boost failure likelihood just as demand peaks. Research shows that introducing IoT-based monitoring for cleaning HVAC components in high-occupancy commercial spaces can yield measurable energy benefits. By the time an HVAC manufacturer’s compressor fails in August, costs to repair and loss of tenant comfort are multiplied.
Condition-Based Data & Asset Trending Powers Predictive Maintenance
Benchmarking and trending asset performance across sites turns guesswork into data-driven action. Key metrics such as compressor runtime, refrigerant pressure, amp draw, and coil delta-T, when fed into an HVAC IQ platform, deliver real-time health scores. Trend analysis exposes anomalies and declining performance long before failure. For example, noticing a 10 % rise in compressor current draw over two weeks can trigger a preventive coil clean-out, not a breakdown.
The International Energy Association (IEA) warns that rising cooling demand could become a vicious cycle: more energy use, more emissions, more heat. Condition-based monitoring, powered by trending data, not only helps prevent equipment breakdowns but also curbs the rising spiral of energy use. When systems are properly tuned and optimized, even under full load, both energy consumption and carbon emissions decrease.
Facilities Teams as Strategic Energy Champions
For maintenance managers overseeing multi-site portfolios, this is a strategic moment. Three years of alternate summers that peak and prolong demand justify a shift from reactive firefighting to predictive stewardship. By shifting budget from emergency repairs to condition-based monitoring technology, teams unlock better vendor negotiation, longer equipment lifespans, reduced need for temperature cooling, and cross-site visibility for informed decision-making.
Energy managers also benefit, with up to a 22% reduction in electricity costs during peak summers, which directly boosts the bottom line. This creates a triple win: cost savings, enhanced tenant comfort, and improved sustainability performance, which are recognized by investors and highlighted in corporate responsibility reports.
Action Checklist: Beat the Heat, Boost the ROI
Final Word: Comfort & Efficiency in Peak Summer Heat
This summer, facility and energy professionals are not just chasing comfort, they are front-line defenders of retail resiliency. Record-high seasonal heat and longer cooling periods require an evolved approach, shifting from reactive fixes to condition-based maintenance and the use of HVAC intelligence.
By relying on accurate data, managing assets intelligently, and optimizing proactively, multi-site portfolios can withstand hotter, longer summers while delivering exceptional comfort and cost efficiency. And in doing so, facilities leaders elevate their role from maintenance enforcers to strategic energy optimizers.
The heat is rising but with intelligent asset management, comfort and savings don’t have to suffer.
Learn More!
Sources: